Class InstructionList

    • Constructor Detail

      • InstructionList

        public InstructionList()
        Create (empty) instruction list.
      • InstructionList

        public InstructionList​(Instruction i)
        Create instruction list containing one instruction.
        Parameters:
        i - initial instruction
      • InstructionList

        public InstructionList​(BranchInstruction i)
        Create instruction list containing one instruction.
        Parameters:
        i - initial instruction
      • InstructionList

        public InstructionList​(CompoundInstruction c)
        Initialize list with (nonnull) compound instruction. Consumes argument list, i.e., it becomes empty.
        Parameters:
        c - compound instruction (list)
      • InstructionList

        public InstructionList​(byte[] code)
        Initialize instruction list from byte array.
        Parameters:
        code - byte array containing the instructions
    • Method Detail

      • isEmpty

        public boolean isEmpty()
        Test for empty list.
      • findHandle

        public static InstructionHandle findHandle​(InstructionHandle[] ihs,
                                                   int[] pos,
                                                   int count,
                                                   int target)
        Find the target instruction (handle) that corresponds to the given target position (byte code offset).
        Parameters:
        ihs - array of instruction handles, i.e. il.getInstructionHandles()
        pos - array of positions corresponding to ihs, i.e. il.getInstructionPositions()
        count - length of arrays
        target - target position to search for
        Returns:
        target position's instruction handle if available
      • findHandle

        public InstructionHandle findHandle​(int pos)
        Get instruction handle for instruction at byte code position pos. This only works properly, if the list is freshly initialized from a byte array or setPositions() has been called before this method.
        Parameters:
        pos - byte code position to search for
        Returns:
        target position's instruction handle if available
      • append

        public InstructionHandle append​(InstructionHandle ih,
                                        InstructionList il)
        Append another list after instruction (handle) ih contained in this list. Consumes argument list, i.e., it becomes empty.
        Parameters:
        ih - where to append the instruction list
        il - Instruction list to append to this one
        Returns:
        instruction handle pointing to the first appended instruction
      • append

        public InstructionHandle append​(Instruction i,
                                        InstructionList il)
        Append another list after instruction i contained in this list. Consumes argument list, i.e., it becomes empty.
        Parameters:
        i - where to append the instruction list
        il - Instruction list to append to this one
        Returns:
        instruction handle pointing to the first appended instruction
      • append

        public InstructionHandle append​(InstructionList il)
        Append another list to this one. Consumes argument list, i.e., it becomes empty.
        Parameters:
        il - list to append to end of this list
        Returns:
        instruction handle of the first appended instruction
      • append

        public InstructionHandle append​(Instruction i)
        Append an instruction to the end of this list.
        Parameters:
        i - instruction to append
        Returns:
        instruction handle of the appended instruction
      • append

        public BranchHandle append​(BranchInstruction i)
        Append a branch instruction to the end of this list.
        Parameters:
        i - branch instruction to append
        Returns:
        branch instruction handle of the appended instruction
      • append

        public InstructionHandle append​(Instruction i,
                                        Instruction j)
        Append a single instruction j after another instruction i, which must be in this list of course!
        Parameters:
        i - Instruction in list
        j - Instruction to append after i in list
        Returns:
        instruction handle of the first appended instruction
      • append

        public InstructionHandle append​(Instruction i,
                                        CompoundInstruction c)
        Append a compound instruction, after instruction i.
        Parameters:
        i - Instruction in list
        c - The composite instruction (containing an InstructionList)
        Returns:
        instruction handle of the first appended instruction
      • append

        public InstructionHandle append​(CompoundInstruction c)
        Append a compound instruction.
        Parameters:
        c - The composite instruction (containing an InstructionList)
        Returns:
        instruction handle of the first appended instruction
      • append

        public InstructionHandle append​(InstructionHandle ih,
                                        CompoundInstruction c)
        Append a compound instruction.
        Parameters:
        ih - where to append the instruction list
        c - The composite instruction (containing an InstructionList)
        Returns:
        instruction handle of the first appended instruction
      • append

        public InstructionHandle append​(InstructionHandle ih,
                                        Instruction i)
        Append an instruction after instruction (handle) ih contained in this list.
        Parameters:
        ih - where to append the instruction list
        i - Instruction to append
        Returns:
        instruction handle pointing to the first appended instruction
      • append

        public BranchHandle append​(InstructionHandle ih,
                                   BranchInstruction i)
        Append an instruction after instruction (handle) ih contained in this list.
        Parameters:
        ih - where to append the instruction list
        i - Instruction to append
        Returns:
        instruction handle pointing to the first appended instruction
      • insert

        public InstructionHandle insert​(InstructionHandle ih,
                                        InstructionList il)
        Insert another list before Instruction handle ih contained in this list. Consumes argument list, i.e., it becomes empty.
        Parameters:
        ih - where to append the instruction list
        il - Instruction list to insert
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public InstructionHandle insert​(InstructionList il)
        Insert another list.
        Parameters:
        il - list to insert before start of this list
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public InstructionHandle insert​(Instruction i,
                                        InstructionList il)
        Insert another list before Instruction i contained in this list. Consumes argument list, i.e., it becomes empty.
        Parameters:
        i - where to append the instruction list
        il - Instruction list to insert
        Returns:
        instruction handle pointing to the first inserted instruction, i.e., il.getStart()
      • insert

        public InstructionHandle insert​(Instruction i)
        Insert an instruction at start of this list.
        Parameters:
        i - instruction to insert
        Returns:
        instruction handle of the inserted instruction
      • insert

        public BranchHandle insert​(BranchInstruction i)
        Insert a branch instruction at start of this list.
        Parameters:
        i - branch instruction to insert
        Returns:
        branch instruction handle of the appended instruction
      • insert

        public InstructionHandle insert​(Instruction i,
                                        Instruction j)
        Insert a single instruction j before another instruction i, which must be in this list of course!
        Parameters:
        i - Instruction in list
        j - Instruction to insert before i in list
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public InstructionHandle insert​(Instruction i,
                                        CompoundInstruction c)
        Insert a compound instruction before instruction i.
        Parameters:
        i - Instruction in list
        c - The composite instruction (containing an InstructionList)
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public InstructionHandle insert​(CompoundInstruction c)
        Insert a compound instruction.
        Parameters:
        c - The composite instruction (containing an InstructionList)
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public InstructionHandle insert​(InstructionHandle ih,
                                        Instruction i)
        Insert an instruction before instruction (handle) ih contained in this list.
        Parameters:
        ih - where to insert to the instruction list
        i - Instruction to insert
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public InstructionHandle insert​(InstructionHandle ih,
                                        CompoundInstruction c)
        Insert a compound instruction.
        Parameters:
        ih - where to insert the instruction list
        c - The composite instruction (containing an InstructionList)
        Returns:
        instruction handle of the first inserted instruction
      • insert

        public BranchHandle insert​(InstructionHandle ih,
                                   BranchInstruction i)
        Insert an instruction before instruction (handle) ih contained in this list.
        Parameters:
        ih - where to insert to the instruction list
        i - Instruction to insert
        Returns:
        instruction handle of the first inserted instruction
      • move

        public void move​(InstructionHandle start,
                         InstructionHandle end,
                         InstructionHandle target)
        Take all instructions (handles) from "start" to "end" and append them after the new location "target". Of course, "end" must be after "start" and target must not be located withing this range. If you want to move something to the start of the list use null as value for target.

        Any instruction targeters pointing to handles within the block, keep their targets.

        Parameters:
        start - of moved block
        end - of moved block
        target - of moved block
      • move

        public void move​(InstructionHandle ih,
                         InstructionHandle target)
        Move a single instruction (handle) to a new location.
        Parameters:
        ih - moved instruction
        target - new location of moved instruction
      • delete

        public void delete​(InstructionHandle from,
                           InstructionHandle to)
                    throws TargetLostException
        Remove instructions from instruction `from' to instruction `to' contained in this list. The user must ensure that `from' is an instruction before `to', or risk havoc. The corresponding Instruction handles must not be reused!
        Parameters:
        from - where to start deleting (inclusive)
        to - where to end deleting (inclusive)
        Throws:
        TargetLostException
      • delete

        public void delete​(Instruction from,
                           Instruction to)
                    throws TargetLostException
        Remove instructions from instruction `from' to instruction `to' contained in this list. The user must ensure that `from' is an instruction before `to', or risk havoc. The corresponding Instruction handles must not be reused!
        Parameters:
        from - where to start deleting (inclusive)
        to - where to end deleting (inclusive)
        Throws:
        TargetLostException
      • contains

        public boolean contains​(Instruction i)
      • setPositions

        public void setPositions()
      • setPositions

        public void setPositions​(boolean check)
        Give all instructions their position number (offset in byte stream), i.e., make the list ready to be dumped.
        Parameters:
        check - Perform sanity checks, e.g. if all targeted instructions really belong to this list
      • getByteCode

        public byte[] getByteCode()
        When everything is finished, use this method to convert the instruction list into an array of bytes.
        Returns:
        the byte code ready to be dumped
      • getInstructions

        public Instruction[] getInstructions()
        Returns:
        an array of instructions without target information for branch instructions.
      • toString

        public String toString​(boolean verbose)
        Parameters:
        verbose - toggle output format
        Returns:
        String containing all instructions in this list.
      • getInstructionHandles

        public InstructionHandle[] getInstructionHandles()
        Returns:
        array containing all instructions (handles)
      • getInstructionPositions

        public int[] getInstructionPositions()
        Get positions (offsets) of all instructions in the list. This relies on that the list has been freshly created from an byte code array, or that setPositions() has been called. Otherwise this may be inaccurate.
        Returns:
        array containing all instruction's offset in byte code
      • copy

        public InstructionList copy()
        Returns:
        complete, i.e., deep copy of this list
      • replaceConstantPool

        public void replaceConstantPool​(ConstantPoolGen old_cp,
                                        ConstantPoolGen new_cp)
        Replace all references to the old constant pool with references to the new constant pool
      • dispose

        public void dispose()
        Delete contents of list. Provides better memory utilization, because the system then may reuse the instruction handles. This method is typically called right after MethodGen.getMethod().
      • getLength

        public int getLength()
        Returns:
        length of list (Number of instructions, not bytes)
      • size

        public int size()
        Returns:
        length of list (Number of instructions, not bytes)
      • redirectBranches

        public void redirectBranches​(InstructionHandle old_target,
                                     InstructionHandle new_target)
        Redirect all references from old_target to new_target, i.e., update targets of branch instructions.
        Parameters:
        old_target - the old target instruction handle
        new_target - the new target instruction handle
      • redirectLocalVariables

        public void redirectLocalVariables​(LocalVariableGen[] lg,
                                           InstructionHandle old_target,
                                           InstructionHandle new_target)
        Redirect all references of local variables from old_target to new_target.
        Parameters:
        lg - array of local variables
        old_target - the old target instruction handle
        new_target - the new target instruction handle
        See Also:
        MethodGen
      • redirectExceptionHandlers

        public void redirectExceptionHandlers​(CodeExceptionGen[] exceptions,
                                              InstructionHandle old_target,
                                              InstructionHandle new_target)
        Redirect all references of exception handlers from old_target to new_target.
        Parameters:
        exceptions - array of exception handlers
        old_target - the old target instruction handle
        new_target - the new target instruction handle
        See Also:
        MethodGen
      • update

        public void update()
        Call notify() method on all observers. This method is not called automatically whenever the state has changed, but has to be called by the user after he has finished editing the object.